When you happen to notice that some of the tiles in your property are coming loose and are in need of repair already, it would be best for you to have it fixed the moment you notice its discrepancies that prolonging the damage as this may cause you to go overboard with your budget. And also, there goes the fact that if you just left the tiles that are coming loose as is, there is a big possibility of it coming off and breaking and you know how dangerous it is to let shards of broken tiles to lie on the floor since people may trip over it and eventually get injured. Know that there are so many ways on how you can deal with tiles that are coming loose and some of which are a whole lot better than the others.
Pulling the tiles that are coming loose up and replacing them is considered as one of the ways on how you can effectively handle such matter at hand. But then again, the downside of replacing all the tiles that are coming loose is that it is not only expensive, there goes the fact that it can be messy and time consuming as well. When the problem that you have only deals with several pieces of tiles that are coming loose, replacement is not necessary to be taken as this can be fixed by tile repair alone.
And since you feel like choosing tile repair over tile replacement, we want you to be informed about the things that you have to do before you proceed with it like cleaning the tiles first using a household cleaner. Once you are done cleaning the tiles, the next thing that you should do is to put the special ceramic glue onto the areas that are cracked. In order for you to make the tile stick to the floor, what you can do is to use a knife to force it to the floor and that knife as well can also be used to smoothen the area that is damaged. Once you have placed the damaged tile again to the floor, you must not move it from one place to another since you have to let the glue work for twenty four hours.
If you see that the glue has already dried up, the next thing that you should do is to sand them down using sandpaper. You have to continue sanding down the dried glue until you achieve an area that is completely flat. Of course, this will not be made possible if you are rough with your movements hence, make sure that you are doing it with light and quick strokes.